Menu
header photo

Carp Fishing Tips - The Value of Sharp Carp Hooks

September 20, 2013

The number one change you will make to increase your odds of landing your goal carp is always to sharpen your hooks, when you are carp fishing.

Why does it matter?

Because you take a brand new hook out from the supply does not imply that it's sharp. If you do not trust in me try this with another hook you remove of the packet:

• Take a jeweller's eye glass or loupe and having a regular hand, shift the eye glass to within about 20mm of the hook point.

• Move it in and out to achieve emphasis and then move your eye position relative to the glass to within 30mm to obtain a really close view.

• The lift level should appear in perfect focus. You'll note that the purpose is actually completed!

What this signifies is that, although the radius of the stage is small, it will be easier for the carp to eject the rig and it will boost the risk of a hook pull. Due to the constant degree of fishing pressure, large carp in France have grown to be extremely successful at getting rid of stations, thus making time for your hooks is crucial. A sharp hook may penetrate the mouth of the carp better and features a better opportunity of sticking to the mouth when the carp tries to do away with the platform.

The solution: develop your hooks

Some organizations provide a complete hook sharpening kit nevertheless you can achieve the same results by assembling your personal kit which has to include:

* Jeweller's eye glass or loupe

* A lift hold

* An excellent record

* A refine

* Vaseline

How exactly to sharpen your hooks

Step 1 - Use a hook clamp to hold the hook securely in position. You can use other clamping devices too such as for instance a device maker's hold (your hands or even a set of pliers will not be up-to the job!)

Step 2 - In simple strokes from right to left, work with a very good file to follow the contours of the point. This should be done in several delicate strokes. On inspection, the 4mm roughly top side of the point should appear absolutely bright and in the side the hook point should appear razor sharp with a few magnetised filing debris (do not check out the next phase until it is!)

Step 3 - Repeat the process (employed in the same course as before) for each side of the hook until it's razor sharp when seen from directly above with the spectacle. Use your hands or a cloth to wipe off excess filing debris.

Step 4 - Now get the hone that may work better if you dip it in water previous and during use. Follow the same contours of the catch when you did with the document in the three planes left, (top and right side). Examine with the attention glass once you have honed each face with a couple of strokes. You should accomplish a point that at 20x magnification is indeed sharp that the point disappears to nothing!

Step 5 - To test the sharpness of the carp rigs hook, gently place the hook point contrary to the end of your finger and release. The land must be sharp enough to hang there all alone with or without the weight of 2 x 20mm carp lures. Demonstrably it will do this using a blunt hook in case you stab it in your finger but it requires the very finest of points to do this trick correctly by just resting the purpose against it. Then it is not sharp enough If the catch does not pass this test and you should start again.

More details is available click here.

Step 6 - As this method removes any coating that has been on the hook, we must defend it against corrosion within the water. A sharp hook is a blunt hook in a matter of hours without the anti-corrosion protection. Only apply a small amount of Vaseline on all sides of the purpose to protect it throughout fishing.

Go Back

Comment